Energy From Thorium Discussion Forum

It is currently Sep 19, 2018 4:06 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Dec 15, 2017 3:10 pm 
Offline

Joined: Jul 07, 2010 4:49 pm
Posts: 123
Location: USA
"Breakthroughs Could Make Commercial Laser Nuclear Fusion Through Billion Times Improvements In Yield"

http://revolution-green.com/breakthroug ... nts-yield/

"Road map to clean energy using laser beam ignition of boron-hydrogen fusion"


https://www.cambridge.org/core/journals ... BAA993078C

HB11 Energy Headed by Professor Heinrich Hora, HB11 Energy promises low cost fusion power through new developments in laser boron fusion. Heinrich is a Professor Emeritus at University of New South Wales, Australia, and Vice-President of the Royal Society of New South Wales. “We expect to be able to provide energy for about ¼ of the price of coal fired power, without any carbon emissions or radioactive by-products, which will be disruptive to the power industry. With the small size and footprint of a HB11 power station, the addressable market is expected to reach further than the power grid to applications such as ships, submarines, large factories or to remote locations such as isolated towns and mine sites.” "Unlike Deuterium Tritium fusion and fission techniques, the HB11 reaction is sufficiently clean with respect to production of any harmful by-products or radiation. It also has the potential to create electricity directly without the need for a heat exchanger and steam turbine to generate electricity as required for coal or fission nuclear power stations. This will allow power stations to be built with a relatively small capital investment and footprint based on presently achieved extreme laser technology."

https://www.hb11.energy

https://en.wikipedia.org/wiki/Heinrich_Hora


Top
 Profile  
 
PostPosted: Dec 17, 2017 4:29 am 
Offline

Joined: Jun 12, 2011 2:24 pm
Posts: 92
Location: Taunusstein, Germany
The original paper is behind a pay wall:
PW: qxZbqYlsWDI3mc0F


Attachments:
qxZbqYlsWDI3mc0F.zip [341.96 KiB]
Downloaded 88 times
Top
 Profile  
 
PostPosted: Dec 17, 2017 10:58 am 
Offline

Joined: Jul 07, 2010 4:49 pm
Posts: 123
Location: USA
I just heard from them. They say they are about 10 years from a fully functional prototype, and 2-3 years away from a laboratory proof-of-concept. They stress that the theoretical basis is now well established and that their fusion method will be easier to manage and cheaper than D-T fusion.


Top
 Profile  
 
PostPosted: Dec 18, 2017 11:44 am 
Offline

Joined: Jul 07, 2010 4:49 pm
Posts: 123
Location: USA
Update on fusion

An Intensive Analysis of Lockheed-Martins’ Fusion Effort

http://fusion4freedom.us/intensive-anal ... on-effort/

If fusion at low cost is possible, what will that do to fission reactors and investments? If low cost fusion is not possible, then we had better work on fission to find a way to make it cleaner and cheaper and safer. Low Energy Nuclear Reaction is now pretty much dead after Rossi has been exposed as a fraud. No LENR based company has anything beyond measuring errors and hype. Hot fusion is difficult and we are at least 10 years away from any working prototype. Luckily, we do have enough fossil fuels to last another 100 years. Right now, fossil fuels are the only thing keeping us from starving to death, yet the media keeps condemning them as evil. Is eating and surviving evil?


Top
 Profile  
 
PostPosted: Dec 23, 2017 1:06 pm 
Offline

Joined: Jun 12, 2011 2:24 pm
Posts: 92
Location: Taunusstein, Germany
There is a patent application that reveals some more details:
https://patentscope.wipo.int/search/en/ ... S195467757

The fuel rods have to be very thin: 10mm x 0.2mm. Focus 30PW of laser power onto a surface that small? Flattop beam profile?

The little coil capacitor device is 30mm wide, 2mm thick and made of nickel. That's a lot of matter that is vaporized with every shot. Were does all that matter go? Sublime on the optical windows? Attenuate the next laser pulse?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group